天然产物研究与开发 ›› 2017, Vol. 29 ›› Issue (5): 862-866.doi: 10.16333/j.1001-6880.2017.5.025

• 开发研究 • 上一篇    下一篇

丹酚酸A的分离纯化工艺及其抗氧化活性的研究

张愉,季梅,孙隆儒*   

  1. 山东大学药学院,济南 250012
  • 出版日期:2017-05-31 发布日期:2017-06-09

Separation,Purification and Antioxidant Activity of Salvianolic Acid A from Salvia miltiorrhiza var.alba

ZHANG Yu,Ji Mei,SUN Long-ru*   

  1. School of Pharmaceutical Science,Shandong University,Jinan 250012,China
  • Online:2017-05-31 Published:2017-06-09

摘要: 研究优化聚酰胺树脂分离纯化白花丹参丹酚酸A的最佳工艺,并测试其提取物的抗氧化活性。以吸附量和解吸量为指标,利用静态吸附和动态吸附的方法,确定丹酚酸A的最佳分离纯化条件。结果表明聚酰胺树脂的最佳纯化工艺条件为:上样液丹酚酸A质量浓度为11 g/L,上样液体积流量为1.0 mL/min,上样量为150 mL,洗脱溶剂为50%乙醇,洗脱体积流量为1.0 mL/min,洗脱体积为10 BV,纯化后丹酚酸A量可达40.36%。通过清除DPPH自由基和还原能力测定初步评判该工艺下的提取物的抗氧化活性,结果表明,该提取物具有良好的抗氧化活性。

关键词: 白花丹参, 丹酚酸A, 聚酰胺树脂, 工艺优化, 抗氧化活性

Abstract: To optimize the separation and purification technology of salvianolic acid A from Salvia miltiorrhiza var. alba with polymide resin.The antioxidant activity of the purified salvianolic acid A were studied in vitro. With adsorption capacity and desorption rate as index,static and dynamic adsorption-desorption were used to determine the optimal separation and purification conditions of salvianolic acid A.The optimal conditions of polymide resin were as follows:sample injection concentration was 11 g/L,sample flow rate was 1.0 mL/min,quantity of adsorption was 150 mL,desorption rate was 1.0 mL/min,and elution volume was 10 BV of 50% ethanol.After the purification,the purity of obtained salvianolic acid A was 40.36%.Moreover,the antioxidant activity of the extract were evaluated by DPPH scavenging assay and reducing power.The results showed that the obtained salvianolic acid A had good antioxidant activity.

Key words: Salvia miltiorrhiza var.alba, salvianolic acid A, polymide resin, optimal process, antioxidant activity